Lexmark Optra T616 Technical Reference - Page 116
Lines Per Inch
View all Lexmark Optra T616 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
3-39 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LPPDS (DEFAULT only) LPPDSFORMLINES (DEFAULT only) LPPDSLINESPERINCH (DEFAULT only) LPREPRINTEDLENGTH (DEFAULT only) LPREPRINTEDLOADING (DEFAULT only) Function Selections Activate Personal Printer Data Stream (PPDS) printer language ON, OFF Use ON to enable PPDS printer language and OFF to disable PPDS printer language. After this command is processed, the printer performs a Power On Reset (POR) to activate the changes. Note: The following printer settings in NVRAM are changed when PPDS is activated: • PCL and PS SmartSwitch settings for each port are turned off • Printer Language is set to PPDS Lines Per Page 1 to 255 (PPDS) Factory Default OFF 64, 68 (Country specific) Lines Per Inch Preprinted Paper Length 0.25 to 30.00 in increments of 0.25 Note: If a Lines Per Inch setting outside this range is specified, the printer defaults to the closest number in the range. NORMAL, SHORT 6.00 NORMAL Preprinted OFF, DUPLEX Paper Loading OFF