Lexmark Prestige Pro800 User's Guide - Page 49
Printing photos from a memory device using the proof sheet, Printing from a Bluetooth-enabled device
View all Lexmark Prestige Pro800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Printing photos from a memory device using the proof sheet 1 Load letter- or A4-size plain paper. 2 Insert a memory card or flash drive. The Memory Device screen appears on the display. 3 Navigate to Print Proof Sheet: More Options > Proof Sheet > Print Proof Sheet 4 Select which photos you want to print. You can print a proof sheet: • For the 20 most recent photos, if there are 20 or more photos on the memory device. • For all photos on the memory device. • By date, if the photos on the card were taken on different dates. If you choose this option, select the date, and then touch Accept. The proof sheet prints. 5 Follow the instructions on the proof sheet to select which photos to print, the number of copies per photo, red-eye reduction, color effects, page layout, print options, and paper size. Note: When making selections, make sure to fill in the circles completely. 6 Load photo paper. Note: Make sure that the paper matches the size that you selected on the proof sheet. 7 Load the proof sheet facedown on the scanner glass. 8 Touch Scan Proof Sheet, and then touch Continue. The printer scans the proof sheet and then starts printing the photos. Note: For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing. Printing from a Bluetooth-enabled device • This printer is compliant with Bluetooth Specification 2.0. It supports the following profiles: Object Push Profile (OPP) and Serial Port Profile (SPP). Check with your Bluetooth-enabled device manufacturers (cellular phone or PDA) to determine their hardware compatibility and interoperability. It is recommended that you use the latest firmware on your Bluetooth-enabled device. • To print Microsoft documents from your Windows® Mobile/Pocket PC PDA, additional third-party software and drivers are required. For more information about the required software, see the documentation for your PDA. Setting up a connection between your printer and a Bluetooth-enabled device Note: The printer does not support printing files from your computer using a Bluetooth connection. You need to set up a connection between a Bluetooth-enabled device and your printer if you are sending a print job from the Bluetooth device for the first time. You will need to repeat the setup if: • You reset the printer to its factory default settings. • You change the Bluetooth security level or the Bluetooth pass key. Printing 49