Lexmark T630n Setup Guide - Page 22
Installing an envelope feeder, Set up the printer and print media handling options, snaps
UPC - 734646532211
View all Lexmark T630n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
b Rotate the protector overlay until the latch on the top snaps into the groove as shown. Static brush holder Plastic bracket Installing an envelope feeder 6 If you are not installing any print media handling options, attach the wire bail: a Remove the printer top cover and slide the plastic bracket onto the static brush holder. Adjust the bracket so it is centered over the area where print media exits. b Place the tips of the wire bail into the ends of the plastic bracket so that the bail curves downward. c Replace the top cover. The envelope feeder attaches to the front of your printer behind the lower front door. It can be removed when you are not using it, making the printer more compact. Refer to the Publications CD for details about using the envelope feeder. Set up the printer and print media handling options 17