Lexmark T630n Setup Guide - Page 8
Step1: Unpack the printer, Setting up a multifunction printer, Preparing for setup
UPC - 734646532211
View all Lexmark T630n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Step 1: Unpack the printer Setting up a multifunction printer If you purchased a multifunction printer (MFP) that copies, faxes, and scans, refer to the documentation that came with the device to see if furniture or other hardware needs to be set up first. Preparing for setup CAUTION: The printer weighs 17.3-19 kg (38-42 lb) depending on the model, and requires at least two people to lift it safely. 1.4 m (4.5 ft) 30 cm (12 in.) 30 cm (12 in.) 51 cm (20 in.) 30 cm (12 in.) Note: Leave the printer in the box until you are ready to install it. Make sure you are ready to begin setting up the printer. 1 Select a location for your printer. • Leave enough room to open the printer trays, covers, doors, and options. It is also important to allow space around the printer for proper ventilation. • Provide the proper environment: - A firm, level surface - Away from the direct airflow of air conditioners, heaters, or ventilators - Free of sunlight, humidity extremes, or temperature fluctuations - Clean, dry, and free of dust Unpack the printer 3