Lexmark T632DN Setup Guide - Page 14
Set up the printer and print media handling options, always, provided with the printer. The 16
UPC - 734646387019
View all Lexmark T632DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
3 Plug one end of the jumper cord into the printer. Plug the other end of the jumper cord into the drawer. 4 Reconnect any disconnected cables. 5 If you intend to operate your 2000-sheet drawer at 100-127V power, instead of using the power cord provided with the printer you must use the 16 AWG power cord provided with the 2000-sheet drawer. Plug the 16 AWG power cord into the back of the drawer and then into a properly grounded electrical outlet. If you later decide to stop using the 2000-sheet drawer, you should then use the original power cord provided with the printer. The 16 AWG power cord should always remain with the 2000-sheet drawer. If you intend to operate your 2000-sheet drawer at 200-240V power, use the power cord provided with the printer. Plug the power cord into the back of the drawer and then into a properly grounded electrical outlet. Set up the printer and print media handling options 9