Lexmark T632dtn Service Manual - Page 216
Upper front cover hinge assembly removal, Upper front cover removal
UPC - 734646538404
View all Lexmark T632dtn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
4060-xxx Upper front cover hinge assembly removal 1. Remove the upper front cover. See "Upper front cover removal" on page 4-12. 2. Remove the laser cover assembly. See "Laser cover removal" on page 4-14. 3. Remove the C-clips (A) from the upper front cover hinge assembly left and right hinge pins and remove the pins. Note the pin orientation and the C-clip location on the inside of each hinge. A B A 4. Detach the two springs (B) from the upper front cover hinges. 5. Detach spring (C) from the left side of the hinge assembly. 6. Remove the cover closed switch assembly. C D B A B 7. Disconnect the operator panel cable from the operator panel assembly. 8. Raise the upper front cover hinge assembly to a position that lets you lift the left pivot arm from the mounting bracket (D). 9. Lift the left pivot arm from the bracket and move the upper cover hinge assembly toward the left to clear the right upper cover pivot arm from the mounting bracket. 10. Remove the upper front cover hinge assembly. 4-62 Service Manual