Lexmark T650DN User Guide - Page 35
Removing an optional duplex unit, Notes, CAUTION-SHOCK HAZARD, CAUTION-POTENTIAL INJURY
UPC - 734646317344
View all Lexmark T650DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Additional printer setup 35 Notes: • T652dn and T654dn models have an internal duplex unit installed in the printer. • T652n and T654n models do not support an optional duplex unit. CAUTION-SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. 1 Unpack the duplex unit, and then remove any packing material. 2 Place the duplex unit in the location chosen for the printer. Note: If you have multiple options to install, then see the section about the recommended order of installation. 3 Align the printer with the duplex unit, and then lower the printer into place. CAUTION-POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to move it safely. Removing an optional duplex unit Warning-Potential Damage: Lifting the printer from the duplex unit without pushing in the safety latches could damage the latches. To remove the duplex unit, push in the safety latches on both sides of the duplex unit until they click and stay recessed, and then lift the printer.