Lexmark W812 Technical Reference - Page 72
Table 2-35, Cursor Positioning Continued, CR=CR+LF
View all Lexmark W812 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
2-60 PCL Table 2-35: Cursor Positioning (Continued) Command / Parameters Function / Result ESC&a#R Vertical Cursor Positioning (in Rows) # = number of Rows1 Moves the cursor to a new position along the vertical axis. Note: Row height is determined by either the Vertical Motion Index (VMI) or the Set Line Spacing Command. ESC&a#V Vertical Cursor Positioning (in Decipoints) # = number of Decipoints1 Moves the cursor to a new position along the vertical axis. (1 Decipoint = 1/720 inch) ESC*p#Y Vertical Cursor Positioning (in PCL Units) # = number of PCL Units1 Moves the cursor to a new position along the vertical axis. Note: PCL units are set by the Unit-of-Measure Command. ESC= Half Line-Feed Moves the cursor down 1/2 line (1/2 of the current VMI). ESC&k#G Set Line Termination 0 CR=CR, LF=LF, FF=FF (Default) Controls how the printer responds to the Carriage Return (CR), Line 1 CR=CR+LF, LF=LF, FF=FF Feed (LF), and Form Feed (FF) control codes. 2 CR=CR, LF=CR+LF, FF=CR+FF 3 CR=CR+LF, LF=CR+LF, FF=CR+FF ESC&f#S Push / Pop Cursor Position 0 Push 1 Pop Sets up a cursor position stack for storing and recalling various cursor positions. The stack can store up to 20 cursor positions. 1 Parameter preceded by + or - sign denotes a relative cursor move from the current cursor position. Parameter without a sign denotes an absolute cursor move from the top left margin.