Lexmark W840 User's Guide - Page 32
Installing a hard disk, Align the screw holes on the mounting plate with the holes in the hard disk.
View all Lexmark W840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Installing options Installing a hard disk Note: You need a small Phillips screwdriver to attach the hard disk to the mounting plate. 1 Remove the system board access panel. (See Accessing the printer system board.) 2 Remove the mounting plate, hard disk, ribbon cable, and attachment screws from the package. 3 Align the ribbon cable connector with the connector pins on the hard disk. 4 Attach the ribbon cable to the hard disk. Hard disk Ribbon cable 5 Align the screw holes on the mounting plate with the holes in the hard disk. 6 Secure the mounting plate to the hard disk with the screws. Installing a hard disk 32
Installing a hard disk
32
Installing options
Installing a hard disk
Note:
You need a small Phillips screwdriver to attach the hard disk to the mounting plate.
1
Remove the system board access panel. (See
Accessing the printer system board
.)
2
Remove the mounting plate, hard disk, ribbon cable, and attachment screws from the package.
3
Align the ribbon cable connector with the connector pins on the hard disk.
4
Attach the ribbon cable to the hard disk.
5
Align the screw holes on the mounting plate with the holes in the hard disk.
6
Secure the mounting plate to the hard disk with the screws.
Ribbon cable
Hard disk