Lexmark Wheelwriter 10 Operation Guide - Page 45

Typing Problems Line Spacing Aligns Incorrectly 1. Look for objects Inside the typewriter. 2. Look at the number of carbon copies being used (five maximum). 3. Make sure the paper release lever is pushed ail the way back. Paper Feeds Incorrectly 1. Check the number of carbon copies being used (five maximum). 2. When Inserting loose carbon copies, pull the paper release lever forward. Insert the copies, then push the lever all the way back. 3. Look for labels or paper caught under the platen. 4. Make sure the paper release lever is pushed all the way back. 5. Make sure the platen Is latched down at both ends. • Pull the paper release lever all the way toward you. • Push down firmly on each end of the platen. Then push the paper release lever all the way back. 6. If you change the paper ball load lever setting at any time, mAke sure you check it before feeding paper. See "Changing the Top Margin" on page 2-7. Wrong Characters Print or Characters Space incorrectly 1. Turn the typewriter off, wait 30 seconds, then turn the typewriter on again. 2. Try typing again. 3. Make sure the Lang light is off. 4. Try a new printwheel. 5. Look for objects In the path of the carrier. 6. Make sure the printwheel Is changed when there is a language change. Spell Check Problems Spelling Beeper Beeped Three Times When You Turned the Typewriter On There }vas an error In the supplemental dictionary and the dictionary has been erased from memory. If you had selected a spelling beeper tone, it is erased from memory and will have to be selected again. Typewriter Beeped Five Times and Line Space Lights Are Blinking There is a problem with Spell Check; contact your IBM Authorized Deaferl Spell Check Functions Do Not Work If a function of Spell Check does not work, it might be caused by one of the following: • Spell Check is turned off. • An0ther function is active on the typewriter which prevents Spell Check from being used (for example, printer option). • You did not end the word with a word ending (space, punctuation, and so on). • You are trying to add a word that is already in one of the diction- aries. • You are trying to delete a word from the main dictionary. 5-S Operator's Girth) Problem Determination 5-0