Lexmark X125 Setup Sheet - Page 4

Setup questions? Checking first things first If your All-In-One has a problem, first make sure: • The power cord is plugged into your All-In-One and into a properly grounded electrical outlet. • Your telephone cord is securely attached to the line jack on your All-In-One and to the wall jack. • Your telephone has a dial tone. • The cartridge access doors are both completely closed. • Ready appears on the display. • The sticker and transparent tape covering the bottom of the cartridges are removed. When I inserted the installation software CD, nothing happened. 1 Close all open programs. 2 Restart your computer. 3 Make sure you click Cancel on any screens similar to the one in step 15 on the setup sheet. 4 Eject, and then reinsert the installation software CD. 5 From your desktop, double-click My Computer. 6 Double-click your CD-ROM drive icon. If necessary, double-click setup.exe. 7 Continue with step 17 on the setup sheet. Safety information • CAUTION: Do not make any cabling connections during a lightning storm. • Connect the power cord to properly grounded electrical outlet that is near the product and easily accessible. P/N 13H0080 EC 3H0024 © Copyright 2002 Lexmark International, Inc. All rights reserved. Refer to the Quick Reference for other setup and safety information.