Lexmark X4500 MFP X4500 Option Setup Guide - Page 10
Step 3: Attach cables and cords - printers
UPC - 734646393119
View all Lexmark X4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Step 3: Attach cables and cords CAUTION! Do not plug the power supply line cord into an outlet at this time. Power supply Power supply line cord Ethernet port 2 Telephone fax line cable Ethernet cable Warning! Never connect or disconnect the Ethernet cable when the scanner is turned on. 1 Make sure the printer and scanner are turned off and unplugged. 2 Connect the end of the Ethernet cable with the toroid to Ethernet port 1 on the scanner. Connect the other end to the printer. 3 Connect the telephone fax line cable to the scanner and then to a phone jack using a telephone line adapter, if necessary. 4 Connect standard cabling compatible with your network to Ethernet port 2 on the scanner, and then to a network connection. This cable is not provided by Lexmark. 5 Connect the power supply to the scanner. 6 Connect the power supply line cord to the power supply, but do not plug the other end into an electrical outlet at this time. Attach cables and cords 5