Lexmark X500 User's Guide - Page 99
Maintaining the printer, Storing supplies, Conserving toner, Cleaning the exterior of the printer
View all Lexmark X500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Maintaining the printer Periodically, certain tasks are required to maintain optimum print quality. Storing supplies Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them. Do not expose supplies to: • Direct sunlight • Temperatures above 35°C (95°F) • High humidity above 80% • Salty air • Corrosive gases • Heavy dust Conserving toner Toner Saver mode enables you to conserve toner. When Toner Saver mode is enabled, print may appear lighter. To enable Toner Saver mode: 1 From the control panel, press . 2 Press or repeatedly until Machine Settings appears, and then press . 3 Press or repeatedly until Toner Saver Mode appears, and then press . 4 Press or repeatedly until On appears, and then press . 5 Press to return to the Ready state. Note: Toner Saver mode is not recommended when you are printing photos or grayscale images. Cleaning the printer If print quality problems such as streaking occur, follow these cleaning procedures. Warning: Do not put water directly on the printer or use ammonia-based cleaners or volatile solvents, such as thinner, on the printer. Cleaning the exterior of the printer 1 Make sure that the printer is turned off and unplugged from the wall outlet. CAUTION: To avoid the risk of electric shock, unplug the power cord from the wall outlet and disconnect all cables to the printer before proceeding. 2 Remove paper from the paper support and paper exit tray. 3 Dampen a clean, lint-free cloth with water. Warning: Do not use household cleaners or detergents, as they may damage the finish of the printer. 99