Lexmark X544DTN User Guide - Page 45
Adjusting Power Saver, Settings, General Settings, Quiet Mode, Submitting changes, Ready, Timeout
UPC - 734646100069
View all Lexmark X544DTN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Minimizing your printer's environmental impact 45 Choose To On Reduce printer noise. • You may notice a reduction in processing speed. • Printer engine motors do not start until a job is ready to print. You may notice a short delay before the first page is printed. • Fans run at a reduced speed or are turned off. • If your printer has faxing capability, fax sounds are reduced or disabled, including those made by the fax speaker and ringer. Off Use factory default settings. This setting supports the performance specifications for your printer. To select a Quiet Mode setting: 1 From the printer control panel, press . 2 Press the arrow buttons until Settings appears, and then press . 3 Press the arrow buttons until General Settings appears, and then press . 4 Press the arrow buttons until Quiet Mode appears, and then press . 5 Select the setting you want, and then press . Submitting changes appears. Adjusting Power Saver 1 Make sure the printer is on and Ready appears. 2 From the printer control panel, press . 3 Press the arrow buttons until Settings appears, and then press . 4 Press the arrow buttons until General Settings appears, and then press . 5 Press the arrow buttons until Timeout appears, and then press . 6 Press the arrow buttons until Power Saver appears, and then press . 7 Press the arrow buttons to enter the number of minutes for the printer to wait before entering the Power Saver mode. Available settings range from 1-240 minutes. 8 Press . Submitting changes appears. 9 Press , and then press until Ready appears. Note: Power Saver settings can also be adjusted by typing the printer IP address into the address field of your Web browser.