Lexmark X642E Service Manual - Page 93
Scheduled, maintenance on Engine Code CRC - maintenance reset
UPC - 734646258746
View all Lexmark X642E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
7002-xxx User attendance messages (continued) Code Sub code Primary message 62 .xx Disk full 63 .xx Unformatted disk 64 .xx Unsupported disk format 80 .xx Scheduled maintenance advised 81 .xx Engine Code CRC Failure 88 .xx Toner is low 1565 1565 Emul error, load emulation option Description/action Model X646e only. The MFP detects that there is not enough memory or space on the hard disk to store the data of the print job. Touch Continue to clear the message and continue processing the current print job. Any information not previously stored on the hard disk is deleted. • Delete fonts, macros, and other data stored on the hard disk. • Install a hard disk with a larger memory capacity. Model X646e only. The hard disk is not formatted. Format the hard disk prior to performing operations that require the hard disk. If the message remains, the hard disk may be defective and require replacing. Model X646e. The hard disk format is not supported. Format the hard disk prior to performing operations that require the hard disk. If the message remains, the hard disk may be defective and require replacing. Service is required to maintain printer performance. Replace the maintenance items and if necessary, reset the printer maintenance counter. For more information, go to "Scheduled maintenance" on page 6-1. This error displays when the microcode to be programmed in the engine flash code module has failed a CRC check. POR the MFP to clear the message. The microcode data is discarded and must be re-transmitted from the host computer. The toner cartridge is running low on toner. Replace the toner cartridge if the toner low alarm sounds. Touch Continue to clear the message if the toner low alarm does not sound. The download emulator contained in the firmware card does not function with the MFP firmware. Note: The MFP automatically clears the message in 30 seconds and then disables the download emulator on the firmware card. For help downloading the correct download emulator version, contact the place where you bought your printer. Diagnostic information 2-55