Lexmark X644 User's Guide - Page 68
CAUTION, Close the loading door.
View all Lexmark X644 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Printing To load the 2000-sheet drawer: 1 Open the loading door. If the elevator tray is not already in the lowered position, push the elevator button to lower the tray. 2 Flex the sheets back and forth to loosen them, then fan them. Do not fold or crease the print media. Straighten the edges on a level surface. 1 4 7 2 5 8 3 6 9 0 # Elevator button 3 Slightly bend the stack of print media as shown, and place it on the elevator tray with the preferred print side facing down. Align the stack of print media to the back of the drawer. Note: For duplex printing, letterhead or other preprinted paper must be loaded differently. Carefully align each stack as you load it to ensure a smooth edge where the stacks meet. Do not load print media above the load line. Note: When loading more than one ream of paper, we recommend you remove the top and bottom sheet. 1 4 7 2 5 8 3 6 9 0 # Duplex Simplex (single sided) 4 Close the loading door. CAUTION: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a 2000-sheet drawer. Certain other configurations also must have a printer stand or printer base. More information is available on our Lexmark Web site at www.lexmark.com/multifunctionprinters. Loading the 2000-sheet drawer 68