Lexmark X940 User Guide - Page 201

Understanding printer messages 201 Waiting The printer has received data to print, but is waiting for an End‑of‑Job command, a Form Feed command, or additional data. • Touch Continue to print the contents of the buffer. • Cancel the current print job. Waiting for redial The printer is waiting to redial the fax number. Wait for the message to clear. 1565 Emul Error Load Emul Option The printer automatically clears the message in 30 seconds and then disables the download emulator on the firmware card. To fix this, download the correct download emulator version from the Lexmark Web site at www.lexmark.com. 31 Missing or defective cartridge The specified toner cartridge is either missing or not functioning properly. • Remove the specified toner cartridge, and then reinstall it. • Remove the specified toner cartridge, and then install a new one. 32 Replace unsupported cartridge Remove the specified toner cartridge, and then install a supported one. 34 Incorrect paper size, check • Load the appropriate paper or other specialty media in the proper tray. • Touch Continue to clear the message and print the job using a different paper tray. • Check tray length and width guides and make sure the paper is properly loaded in the tray. • Check the Print Properties settings to make sure the print job is requesting the correct paper size and type. • Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper is large enough for the data being printed. • Cancel the current print job. 34 Short paper • Load the appropriate paper or other specialty media in the proper tray. • Touch Continue to clear the message and print the job using a different paper tray. • Check tray length and width guides and make sure the paper is properly loaded in the tray. • Check the Print Properties settings to make sure the print job is requesting the correct paper size and type.