Lexmark XC9255 Users Guide PDF - Page 101
Lines per Notes, PCL5 Minimum Line Width, A4 Width, Auto CR after LF, Tray Renumber
View all Lexmark XC9255 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Understanding the printer menus 101 Menu item Description Lines per Page 1-255 Specify the number of lines of text for each page printed through the PCL® datastream. Notes: • This menu item activates vertical escapement that causes the selected number of requested lines to print between the default margins of the page. • 60 is the U.S. factory default setting. 64 is the international factory default setting. PCL5 Minimum Line Width 1-30 (2*) Set the initial minimum stroke width. Note: Jobs printed in 1200 dpi use the value directly. PCLXL Minimum Line Width 1-30 (2*) A4 Width 198 mm* 203 mm Set the width of the logical page on A4‑size paper. Note: Logical page is the space on the physical page where data is printed. Auto CR after LF Off* On Set the printer to perform a carriage return after a line feed control command. Note: Carriage return is a mechanism that commands the printer to move the position of the cursor to the first position on the same line. Auto LF after CR Off* On Set the printer to perform a line feed after a carriage return control command. Tray Renumber Assign MP Feeder Assign Tray [x] Assign Manual Paper Assign Manual Envelope Configure the printer to work with a different print driver or custom application that uses a different set of source assignments to request a given paper source. Choose from the following options: Off*-The printer uses the factory default paper source assignments. None-The paper source ignores the Select Paper Feed command. 0-199-Select a numeric value to assign a custom value to a paper source. Tray Renumber View Factory Defaults Show the factory default value assigned for each paper source. Tray Renumber Restore Defaults Restore the tray renumber values to their factory defaults. Print Timeout Off On* (90 seconds) Set the printer to end a print job after it has been idle for the specified amount of time. Note: An asterisk (*) next to a value indicates the factory default setting.