Lexmark XC9255 Users Guide PDF - Page 166
Setting up serial printing (Windows only), Cleaning printer parts, Cleaning the printer
View all Lexmark XC9255 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Maintaining the printer 166 Setting up serial printing (Windows only) 1 Set the parameters in the printer. a From the control panel, navigate to the menu for the port settings. b Locate the menu for the serial port settings, and then adjust the settings, if necessary. c Apply the changes. 2 From your computer, open the printers folder, and then select your printer. 3 Open the printer properties, and then select the COM port from the list. 4 Set the COM port parameters in Device Manager. Notes: • Serial printing reduces printing speed. • Make sure that the serial cable is connected to the serial port on your printer. Cleaning printer parts Cleaning the printer CAUTION-SHOCK HAZARD: To avoid the risk of electrical shock when cleaning the exterior of the printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before proceeding. Notes: • Perform this task after every few months. • Damage to the printer caused by improper handling is not covered by the printer warranty. 1 Turn off the printer, and then unplug the power cord from the electrical outlet. 2 Remove paper from the standard bin and multipurpose feeder. 3 Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum. 4 Wipe the outside of the printer with a damp, soft, lint‑free cloth. Notes: • Do not use household cleaners or detergents, as they may damage the finish of the printer. • Make sure that all areas of the printer are dry after cleaning. 5 Connect the power cord to the electrical outlet, and then turn on the printer. CAUTION-POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.