Lexmark XM9165 User's Guide - Page 199

Saving money and the environment 199 Avoid paper jams Correctly set the paper type and size to avoid paper jams. For more information, see "Avoiding jams" on page 242. Saving energy Using Hibernate mode Hibernate is an ultra‑low‑power operating mode. Notes: • Three days is the default amount of time before the printer enters Hibernate mode. • Make sure to wake the printer from Hibernate mode before sending a print job. A hard reset or a long press of the Sleep button wakes the printer from Hibernate mode. • If the printer is in Hibernate mode, then the Embedded Web Server is disabled. 1 From the home screen, navigate to: > Settings > General Settings 2 From the "Press Sleep Button" or "Press and Hold Sleep Button" menu, select Hibernate, and then touch Submit. Using Eco‑Mode 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > General Settings > Eco‑Mode > select a setting Use To Off Use the factory default settings for all settings associated with Eco‑Mode. Off supports the performance specifications of the printer. Energy Reduce energy use, especially when the printer is idle. • Printer engine motors do not start until it is ready to print. You may notice a short delay before the first page is printed. • The printer enters Sleep mode after one minute of inactivity. Energy/Paper Use all the settings associated with Energy and Paper modes. Plain Paper • Enable the automatic two‑sided (duplex) feature. • Turn off print log features. 3 Click Submit.