Lexmark Z45 Color Jetprinter From Setup to Printing - Page 26
If the test prints, the problem may be with your attached
View all Lexmark Z45 Color Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Did an alignment page print during setup? If not, make sure: - You installed the print cartridges correctly (see page 4). - You follow the instructions on any error message on your computer screen. Is your printer connected directly to your computer? If not, follow these steps: 1 Disconnect your printer from any external devices, such as a hub, switch box, scanner, or fax machine, and then connect it directly to your computer with a USB cable. 2 Print a test page following the instructions for your operating system. Windows Mac OS 8.6 to 9.2 Mac OS X version 10.0.3 to 10.1 1 From your desktop, double-click the Lexmark Z45 Solution Center icon. 2 From the Troubleshooting tab, click Print a Test Page. 1 From the Apple menu, choose Control Panels Lexmark Z45 Control Panel. 2 Click Print Test Page. 1 Open the Lexmark Z45 Utility folder (see page 15). 2 From the Cartridges tab, click Print Test Page. - If the test page prints, the problem may be with your attached device, not your printer. Check the documentation that came with your attached device for help. - If the test page does not print, access the printer software Help (see page 15) for further troubleshooting information. 22