LiftMaster 8355W 8355W Installation Manual - Page 30

Operation Connect With Your Smartphone The Wi-Fi® Garage Door Opener is compatible with up to 16 MyQ enabled accssories. Up to 10 devices can be paired to the Wi-Fi garage door opener's internal gateway. These devices can be controlled with the MyQ app. These devices include any combination of MyQ garage door openers, Wi-Fi garage door openers, MyQ light controls, MyQ gate operators or MyQ commercial door operators. A LiftMaster Internet Gateway (828LM) can be added if you need to control more than 10 devices using the MyQ app. Up to 6 devices can be paired to garage door opener itself (controlled by garage door opener through 900MHz). These devices include any combination of MyQ light controls or a garage door and gate monitor. You will need: l Wi-Fi enabled smartphone, tablet or laptop l Broadband Internet Connection l Wi-Fi signal in the garage (2.4Ghz required), see page 4 l Password for your home network (router's main account, not guest network) l MyQ® serial number located on the garage door opener Connect Your Garage Door Opener to Your Home Wi-Fi Network 1. Lift the push bar on the door control. Press and release the LEARN button OR press and release the yellow LEARN button on the garage door opener 3 times. The garage door opener will beep once and the command LED on the door control will blink to indicate Wi-Fi learn mode. You have 20 minutes to complete the connection process. 2. On your mobile device, go to Settings > Wi-Fi and select the network with the "MyQ-" prefix. 3. Launch the web browser on your smartphone or tablet. Enter setup.myqdevice.com into the browser address bar. Follow the on screen prompts to connect the garage door opener to your Wi-Fi network. The MyQ serial number will display on screen. Write the serial number in the space below. Learn Button LED An LED on the garage door opener will indicate Wi-Fi status. See table below. Learn Button Command LED LED Definition Blue Off - Wi-Fi is not turned on. Blinking - Garage door opener is in Wi-Fi learn mode. Solid - Mobile device connected to the garage door opener. Blue and Green Blinking - Attempting to connect to router. Green Blinking - Attempting to connect to the Internet server. Solid - Wi-Fi has been set up and garage door opener is connected to the internet. NOTES: To erase the Wi-Fi settings, see page 33. If you need help adding devices to your MyQ account, or to learn more go to WiFiHelp.LiftMaster.com. 4. Download the MyQ app from the App Store® or Google Play™ store. Sign up for your MyQ account and add the MyQ serial number to your account. To add a second Wi-Fi garage door opener, repeat steps 1-3. Add the second MyQ serial number to your account in the MyQ app. 30