LiftMaster 882LMW Instructions - English French - Page 1
LiftMaster 882LMW Manual
View all LiftMaster 882LMW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
MULTI-FUNCTION CONTROL PANEL (SECURITY+ 2.0®) MODEL 882LMW AND PREMIUM MOTION-DETECTING CONTROL PANEL MODELS 881LMW AND 886LMW To prevent possible SERIOUS INJURY or DEATH from electrocution: • Be sure power is NOT connected BEFORE installing door control. • Connect ONLY to 12 VOLT low voltage wires. To prevent possible SERIOUS INJURY or DEATH from a closing garage door: • Install door control within sight of garage door, out of reach of children at a minimum height of 5 feet (1.5 m), and away from ALL moving parts of door. • NEVER permit children to operate or play with door control push buttons or remote control transmitters. • Activate door ONLY when it can be seen clearly, is properly adjusted, and there are no obstructions to door travel. • ALWAYS keep garage door in sight until completely closed. NEVER permit anyone to cross path of closing garage door. • Unattended devices and features are to be used ONLY with sectional doors. WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov For use with Security+ 2.0® Garage Door Openers, Wi-Fi® enabled Security+ 2.0® Garage Door Openers (indicated by the Wi-Fi logo on the garage door opener cover) and MyQ® accessories. UNATTENDED OPERATION The Timer-to-Close (TTC) feature, the MyQ® Smartphone Control app, and MyQ® Garage Door and Gate Monitor are examples of unattended close and are to be used ONLY with sectional doors. Any device or feature that allows the door to close without being in the line of sight of the door is considered unattended close. The Timer-to-Close (TTC) feature, the MyQ® Smartphone Control, and any other MyQ® devices are to be used ONLY with sectional doors. INSTALLATION Unplug the garage door opener. Disconnect the battery (if applicable). 1. Connect the wires to the back of the door control. 2. Secure the door control to the wall. 3. Connect the wires to the garage door opener. Plug in the garage door opener and reconnect the battery. The command LED on the door control will blink if installed correctly. To synchronize the garage door opener and the door control, press the push bar up to 3 times, until the garage door opener activates. DRYWALL 6ABx1-1/4" Drywall Anchors GANG BOX 6-32x1" 3 7/16" (11 mm) To insert or release wire, push in tab with screwdriver tip. RED WHITE 1 7/16" (11 mm) 2 Models 881LMW and 886LMW Model 882LMW 5 feet (1.5 m) minimum PROGRAM REMOTE CONTROL 1. Press the LEARN button on the door control twice. The Command LED will blink. 2. Press and release the button on the remote control that you wish to operate your garage door. The garage door opener lights will flash (or two clicks will be heard) and the Command LED will stop blinking when the code has been programmed. KEYLESS ENTRY 1. Press the LEARN button on the door control twice. The Command LED will blink. 2. Enter a 4-digit personal identification number (PIN) on the keypad. Then press the ENTER button. The garage door opener lights will flash (or two clicks will be heard) and the Command LED will stop blinking when the code has been programmed. ?? ?? PIN Command LED Model 882LMW Command LED CONNECT YOUR GARAGE DOOR OPENER TO YOUR HOME WI-FI® NETWORK (for Wi-Fi garage door openers ONLY) 1. Lift the push bar on the door control. Press and release the LEARN button. The garage door opener will beep once and the command LED on the door control will blink to indicate Wi-Fi learn mode. You have 20 minutes to complete the connection process. 2. On your mobile device, go to Settings > Wi-Fi and select the network with the "MyQ-" prefix. 3. Launch the web browser on your smartphone or tablet. Enter setup.myqdevice.com into the browser address bar. Follow the on screen prompts to connect the garage door opener to your Wi-Fi network. The MyQ serial number will display on screen. Write the serial number in the space below. Models 881LMW and 886LMW 4. Download the MyQ app from the App Store® or Google Play™ store. Sign up for your MyQ account and add the MyQ serial number to your account. If you are unsuccessful adding your device, try an alternate web browser or visit WiFiHelp.LiftMaster.com.