LiftMaster CSL24V CSL24V User Manual - Page 2

Thank you for purchasing a LiftMaster gate operator. Our operators are designed to meet or exceed UL325 safety standards and requirements and are quality manufactured for years of safe and reliable service. Think LiftMaster for all of your Access Control needs. OPERATION RESET SWITCH/MANUAL DISCONNECT The reset switch is located on the front of the operator and serves several functions. When referring to "toggling" the reset switch it means pressing the reset switch to the RESET/DISCONNECT position, then back to the NORMAL OPERATION position. Toggling the reset switch will stop a moving gate during a normal open/close cycle, like a stop button. The operator does not need to be reset after doing this. The reset switch will disable the gate in the present position and will energize the solenoid lock for two minutes and disable the maglock for two minutes. MODEL CSL24V SLIDE GATE OPERATOR Press the reset switch to RESET/ DISCONNECT to allow the gate to be opened and closed manually. To resume normal operation press the reset switch to NORMAL OPERATION. RESET/DISCONNECT NORMAL OPERATION MODEL CSW24V SWING GATE Manual Disconnect OPERATOR Handle Press the reset switch to RESET/ DISCONNECT. Release the handle on the operator arm to allow the gate to be opened and closed manually. On a dual gate application the handle must be released on both operators. To resume normal function tighten the handle by pushing it down. 1 RESET/DISCONNECT NORMAL OPERATION