LiftMaster Dial Code Dial Code LC and VF Series Manual - Page 5

RESIDENT USE USING KEYCODES AND UTILITY CODES (ACTIVE ENTRY 1 ONLY) RESIDENT 6-DIGIT KEYCODES Residents are assigned a 6-digit, personalized keycode for accessing the facility. To use the keycode assigned, the resident must first push the key once and enter their keycode. The screen will display "Access * ACCESS GRANTED * Please Enter (fig a.) Granted" (fig a.) and access will be allowed. If an incorrect keycode is entered, the system will inform the user of the invalid entry (fig b.) The resident can then re-enter their keycode. * INVALID ENTRY * Invalid 6-Digit Code (fig b.) EXAMPLE - KEY CODE 002543 = 002 54 3 INDIVIDUAL UTILITY CODES All systems, no matter what the memory capacity, are equipped with 60 different Utility codes. To access the facility within the time zone set, the Utility Company must first press the key TWICE and then enter their 4-digit code. If it is within the programmed time * ACCESS GRANTED * Please Enter (fig c.) zone for entry, the screen will display "Access Granted" (fig c.) and access will be allowed. If, however, it is not within the time zone for entry, the * ACCESS DENIED * Not In Access Period display will inform the user and access will not be (fig d.) allowed (fig d.) EXAMPLE - UTILITY CODE 8716 = 8 71 6 SCREEN SAVER MODE (VF ONLY) If the VF Dial Code System is inactive for 15 seconds it will go into sleep mode. The screen will continue to display the scrolling message "Press Any Key" until a key is pressed (fig e.) The Screen saver mode is not available while in program mode. PRESS ANY KEY (fig e.) LC/VF Page 4