LiftMaster MEGA SWING MEGA SWING - MSWDCBB Manual - Page 3
Introduction, Manual Release, Carton Inventory - operators
View all LiftMaster MEGA SWING manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
INTRODUCTION MANUAL RELEASE To operate gate manually, REMOVE top plastic cover on top of arm. Locate RED release handle. 1. Extend RED handle forward to provide greater leverage. 2. Once extended, pull up on RED handle to release the clamp on the shaft. 3. Next, locate release pin (shown below right), press button and pull out. After you have released the clamp and removed the pin, gate will be free to move manually. 2. Pull Back RED HANDLE 1. Extend 3. Press Button & Pull Pin To Release CARTON INVENTORY Before beginning your installation check that all components were provided and received undamaged. Refer to list below for factory provided parts. Description Qty. Operator 1 Accessory Shelf 1 Owner's Manual 1 Warning Signs 2 Sealed 12 Vdc, 7AH Batteries 2 Primary Arm Assembly 1 Emergency Release Pin 1 3