LiftMaster PPK3M Passport Max Remote Controls - PPV3M PPK3M PPK3PHM - Page 1
LiftMaster PPK3M Manual
View all LiftMaster PPK3M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
PASSPORT MAX REMOTE CONTROLS Model PPV3M Models PPK3M and PPK3PHM NOTE: The images are for reference and your product may look different. To prevent possible SERIOUS INJURY or DEATH from a moving gate or garage door: • ALWAYS keep remote controls out of reach of children. NEVER permit children to operate, or play with remote controls. • Activate gate or door ONLY when it can be seen clearly, is properly adjusted, and there are no obstructions to door travel. • ALWAYS keep gate or garage door in sight until completely closed. NEVER permit anyone to cross path of moving gate or door. INTRODUCTION The Passport MAX is a credentialed remote control. The Passport MAX remote control is a versatile remote control that can be used on access control systems, commercial door operators, gate operators, residential garage door openers, and external receivers (Models PPWR, 850LM, 860LM, STAR1000) that use Security+ 2.0® or Security+ (315 Mhz and 390 Mhz) technology. The additional buttons on the remote control can be programmed to operate up to 3 additional devices such as garage door openers, light controls, gate operators or access control systems. NOTE: Passport MAX credentialed remote controls are not compatible with CPWR, CPWR3, RFMODKT, and RFMODKT3 Passport products. WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov OPTION 2 - SECURITY+ PRODUCTS (315 Mhz and 390 Mhz) 1. Locate the Program button on the remote control. Program Button PROGRAMMING Depending on your product, the LEARN button or LCD menu will be used to program the remote control. If programming to an access control system or gated entry, contact your property manager or LiftMaster® dealer for assistance with any programming or operating instructions. OPTION 1 - SECURITY+2.0® PRODUCTS 1. Locate the LEARN button on your product or the PROGRAM button on the LCD (if applicable). 2. Press and release the yellow LEARN button on your product or the PROGRAM button on the LCD. NOTE: The button color on commercial products may vary. 3. Press and hold the remote control button you wish to use until your product's programming LED turns off or the lights flash on your product. 4. To test, press the programmed button on the remote control and the product will activate. 2. To enter the programming mode on the remote control, press the program button until the LED on the front of the remote control turns on. 3. Press and release the remote control button you wish to use: • 2 times if your product is 315 MHz (Purple LEARN button) • 3 times if your product is 390 MHz (Red/Orange LEARN button) NOTE: The button color on commercial products may vary. 4. Exit programming mode by pressing any remote control button except the button that was just programmed. 5. For LEARN button: • Press and release the LEARN button on your product For LCD: • Press the navigation button below "MENU" to view the Features menu on the LCD. Use the navigation buttons to scroll to "PROGRAM". Select "REMOTE" to program from the program menu. 6. Press and hold the remote control button you programmed in Step 3 until your product's programming LED turns off or the lights flash on your product. 7. To test, press the programmed button on the remote control and the product will activate.