LiftMaster RSW12UL Installation Manual - Page 38

APPENDIX, Dual Gate Settings, Types of Installations

Page 38 highlights

APPENDIX Dual Gate Settings NOTE: We recommend that all accessories and board configurations are set on the primary operator. Main control board Accessories FEATURE PRIMARY OPERATOR Timer-to- Set the TTC dial to desired Close setting SECONDARY OPERATOR OFF ACCESSORY Remote Controls Bi-Part Delay Switch Bi-Part Delay: ON (will open last and close first) Tandem Mode: OFF Synchronized Close: ON Bi-Part Delay: OFF (will open first and close last) Tandem Mode: OFF Synchronized Close: ON LiftMaster Internet Gateway Garage and Gate Monitor PRIMARY OPERATOR SECONDARY OPERATOR Program remote controls 1 to 50 to the primary operator. Program remote controls 51 to 100 to the secondary operator Program to primary operator. Program to primary operator. Types of Installations Standard Installation The illustration is an example of a standard installation. Compact Installation The illustration is an example of a compact installation. If the operator arm will hit an obstruction when the gate is in the open position, refer to LiftMaster.com for compact installation instructions. Entrapment protection devices must be employed in this area. 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

38
Dual Gate Settings
NOTE:
We recommend that all accessories and board configurations are set on the primary operator.
Main control board
FEATURE
PRIMARY OPERATOR
SECONDARY OPERATOR
Timer-to-
Close
Set the TTC dial to desired
setting
OFF
Bi-Part
Delay
Switch
Bi-Part Delay: ON (will open
last and close first)
Tandem Mode: OFF
Synchronized Close: ON
Bi-Part Delay: OFF (will open
first and close last)
Tandem Mode: OFF
Synchronized Close: ON
Accessories
ACCESSORY
PRIMARY OPERATOR
SECONDARY
OPERATOR
Remote Controls
Program remote
controls 1 to 50 to the
primary operator.
Program remote
controls 51 to 100 to the
secondary operator
LiftMaster Internet
Gateway
Program to primary
operator.
Garage and Gate
Monitor
Program to primary
operator.
Types of Installations
Standard Installation
The illustration is an example of a standard installation.
Compact Installation
The illustration is an example of a compact installation. If the operator arm will hit an obstruction when the gate is in the open position, refer to
LiftMaster.com for compact installation instructions.
Entrapment protection devices must be employed in this area.
APPENDIX