LiftMaster TAC2C TAC2C Programming Guide Manual

LiftMaster TAC2C Manual

Get LiftMaster TAC2C PDF manuals and user guides View all LiftMaster TAC2C manuals
Add to My Manuals
Save this manual to your list of manuals

LiftMaster TAC2C manual content summary:

  • LiftMaster TAC2C | TAC2C Programming Guide Manual - Page 1
    The Chamberlain Group 845 Larch Ave. Elmhurst, IL 60126-1196 www.liftmaster.com TAC2C & TAC2D TAC1 RETROFIT KIT FOR CROWN JEWEL & DOORKING 1812® SYSTEMS 1 23 456 789 *0# 1 23 456 789 *0# Programming Guide
  • LiftMaster TAC2C | TAC2C Programming Guide Manual - Page 2
    PROGRAMMING » KEYPAD NOTE: Use the STAR Key "*" to cancel any input. PROGRAMMING INSTRUCTION General Programming Code Programming Relay Programming Level Adjustment SYNTAX Master Code + Command Master Code + Command + Code Master Code + Command + Setting Master Code + Command + Setting
  • LiftMaster TAC2C | TAC2C Programming Guide Manual - Page 3
    PROGRAMMING » KEYPAD CODE SETUP The unit's Master Code is for owner/administrator level commands. The User Codes allow users to activate and latch relays 1 and 2. NOTE: The User Code cannot be the same as the Master Code. ENTER A USER CODE NUMBERS 1. Enter the Master Code: ? ? ? ? The unit will
  • LiftMaster TAC2C | TAC2C Programming Guide Manual - Page 4
    PROGRAMMING » TELEPHONE TELEPHONE PROGRAMMING ENABLE INTERCOM MODE Enter the command tone: 0 3 ADJUST "PICK UP" RING COUNT 1. Enter the command tone: 1 0 ENABLE TELCO MODE Enter the command tone: 0 7 ENABLE STANDARD (LONG) RING TONE Enter the command tone: 1 4 ENABLE ALTERNATE (DUAL) RING
  • LiftMaster TAC2C | TAC2C Programming Guide Manual - Page 5
    Time (Relay 2) .5 Seconds Master Code (4 digits) + 025 + Relay Output Time (0000-8000 Seconds) NOTE: Relay output time is ALWAYS 4 digits. DIRECT COMMANDS FROM THE UNIT KEYPAD KEYSTROKES User Code + 1 User Code + 2 ACTION Triggers Relay 1 Triggers Relay 2 AUDIO FEEDBACK FROM THE UNIT: 1 Low
  • LiftMaster TAC2C | TAC2C Programming Guide Manual - Page 6
    PROGRAMMING » QUICK REFERENCE TELEPHONE PROGRAMMING PROGRAMMING NUMBER **01 **02 **03 **06 **07 **#8 **10 **13 **14 **15 #*16 DESCRIPTION OF TASK Enable Call Forwarding Disable Call Forwarding Enable Intercom Mode Verify Call Forwarding Number (Via Caller ID) Enable Telco Mode Erase Call
  • LiftMaster TAC2C | TAC2C Programming Guide Manual - Page 7
    PROGRAMMING » RESIDENT INSTRUCTIONS FOR TAC MODELS DIRECT COMMANDS FROM THE LOCAL TELEPHONE Direct commands allow you to control the unit from the resident telephone. To use direct commands lift the handset, wait for dial tone and enter the direct command. PROGRAMMING NUMBER *5 *9 **04 **05 **11
  • LiftMaster TAC2C | TAC2C Programming Guide Manual - Page 8
    gives you specific legal rights, and you may also have other rights which vary from state to state. FOR TECHNICAL SUPPORT DIAL OUR TOLL FREE NUMBER: 1-800-528-2806 www.liftmaster.com NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of this receiver and/or
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
1
2
3
4
5
6
7
8
9
*
0
#
The Chamberlain Group
845 Larch Ave.
Elmhurst, IL 60126-1196
www.liftmaster.com
TAC2C & TAC2D
TAC1 RETROFIT KIT FOR CROWN JEWEL & DOORKING 1812
®
SYSTEMS
Programming Guide
1
2
3
4
5
6
7
8
9
*
0
#