LiftMaster TAC2C TAC2C Programming Guide Manual - Page 4

Telephone, From Forwarded Telephone

Get LiftMaster TAC2C PDF manuals and user guides View all LiftMaster TAC2C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

PROGRAMMING » TELEPHONE TELEPHONE PROGRAMMING ENABLE INTERCOM MODE Enter the command tone: 0 3 ADJUST "PICK UP" RING COUNT 1. Enter the command tone: 1 0 ENABLE TELCO MODE Enter the command tone: 0 7 ENABLE STANDARD (LONG) RING TONE Enter the command tone: 1 4 ENABLE ALTERNATE (DUAL) RING TONE (DEFAULT) Enter the command tone: 1 5 2. Enter the ring count: 2 through 5 ENABLE ALTERNATE DTMF PROGRAMMING This feature changes the first programming digit from to # Enter the command tone: 1 3 DISABLE ALTERNATE DTMF PROGRAMMING Enter the command tone: # 1 6 CALL FORWARDING ENTER CALL FORWARDING TELEPHONE NUMBER Enter the command tone: # Up to a 14 Digit Telco Number # VERIFY CALL FORWARDING NUMBER (VIA CALLER ID) Enter the command tone: 0 6 Hang up the phone - Wait for the ring. ERASE THE CALL FORWARDING NUMBER Enter the command tone: # 8 NOTE: This command will also disable the call forwarding mode. ENABLE CALL FORWARDING Enter the command tone: 0 1 DISABLE CALL FORWARDING TELEPHONE COMMANDS FROM LOCAL TELEPHONE TRIGGER RELAY 1 Enter the command tone: 9 Enter the command tone: 0 2 FROM FORWARDED TELEPHONE ACCEPT CALL FROM UNIT ON REMOTE TELEPHONE Enter the command tone: 0 TRIGGER RELAY 2 Extend talk time: "Talk" or press 0 Enter the command tone: 5 ENABLE PARTY MODE (RELAY 1) TRIGGER RELAY 1 Enter the command tone: 9 Enter the command tone: 0 4 TRIGGER RELAY 2 To disengage party mode: Enter "*9" into the local telephone. Enter the command tone: 5 ENABLE "DO NOT DISTURB" MODE Enter the command tone: 1 1 DISABLE "DO NOT DISTURB" MODE Enter the command tone: 1 2 CALL WAITING Press "Flash" once to answer guest, Once again to return to outside call on telco line, if 9 or 5 is not pressed. If 9 (relay 1) or 5 (relay 2) is pressed, the TAC2 will automatically return to the telco line. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
4
PROGRAMMING
» TELEPHONE
ENABLE TELCO MODE
Enter the command tone:
0
7
ENABLE INTERCOM MODE
Enter the command tone:
0
3
ADJUST “PICK UP” RING COUNT
1. Enter the command tone:
1
0
2. Enter the ring count:
2
through
5
ENABLE ALTERNATE DTMF PROGRAMMING
This feature changes the first programming digit from
to
#
Enter the command tone:
1
3
DISABLE ALTERNATE DTMF PROGRAMMING
Enter the command tone:
#
1
6
ENABLE STANDARD (LONG) RING TONE
Enter the command tone:
1
4
ENABLE ALTERNATE (DUAL) RING TONE (DEFAULT)
Enter the command tone:
1
5
TELEPHONE PROGRAMMING
ERASE THE CALL FORWARDING NUMBER
Enter the command tone:
#
8
NOTE:
This command will also disable the call
forwarding mode.
ENABLE CALL FORWARDING
Enter the command tone:
0
1
DISABLE CALL FORWARDING
Enter the command tone:
0
2
VERIFY CALL FORWARDING NUMBER (VIA CALLER ID)
Enter the command tone:
0
6
Hang up the phone - Wait for the ring.
Up to a 14 Digit Telco Number
ENTER CALL FORWARDING TELEPHONE NUMBER
Enter the command tone:
#
#
CALL FORWARDING
TELEPHONE COMMANDS
TRIGGER RELAY 1
Enter the command tone:
9
TRIGGER RELAY 1
Enter the command tone:
9
TRIGGER RELAY 2
Enter the command tone:
5
TRIGGER RELAY 2
Enter the command tone:
5
DISABLE “DO NOT DISTURB” MODE
Enter the command tone:
1
2
ENABLE PARTY MODE (RELAY 1)
Enter the command tone:
0
4
To disengage party mode: Enter “*9” into the local telephone.
ENABLE “DO NOT DISTURB” MODE
Enter the command tone:
1
1
Enter the command tone:
0
Extend talk time: “Talk” or press
0
ACCEPT CALL FROM UNIT ON REMOTE TELEPHONE
FROM FORWARDED TELEPHONE
FROM LOCAL TELEPHONE
CALL WAITING
Press “Flash” once to answer guest, Once again to return to
outside call on telco line, if
9
or
5
is not
pressed. If
9
(relay 1) or
5
(relay 2) is
pressed, the TAC2 will automatically return to the telco line.