Linksys NSS2000 Release Notes for the Cisco NSS2000 Series Network Storage Sys - Page 2

Release Notes Although this feature is working, Cisco does not fully support joining the NSS to the Windows Active Directory Server (ADS) in a Windows Server 2008 environment. This workaround only applies to a single user. (CSCsw93385) Downloading and Upgrading the Firmware This procedure describes how to upgrade the firmware on the NSS by using the NSS Configuration graphical user interface (GUI). NOTE Back up the system configuration file to a USB flash device and/or a RAID volume by using the Configuration GUI before you upgrade the firmware. From the Manager Menu, click Admin Configuration to backup the file. To download and upgrade the NSS firmware: STEP 1 Download the latest image from the Cisco support website to your local computer. See http://www.cisco.com/support/index.shtml for further details. After downloading, do not unzip the file. Base Model Firmware NSS2000 NSS2000_fwupgrade_0116.tar.gz STEP 2 Log into the Configuration GUI. STEP 3 From the Manager Menu, click Admin Maintenance. STEP 4 Click the Browse button and navigate to the NSSxxxx_fwupgrade_0116.tar.gz firmware upgrade image. STEP 5 Click the Upgrade Firmware button. STEP 6 Run this procedure again by repeating Steps 2 though 5. Performing the upgrade twice allows the system to continue to operate properly (when running the latest firmware), if a system failure occurs. NOTE If you are moving drives between two NSS systems, make sure that both of the systems are using the latest firmware and that the system configurations are saved on USB memory sticks and/or a RAID volume. • When the NSS is joined to an ADS domain and you upgrade the firmware, the ADS is unable to access a share. The workaround is to rejoin the NSS to the ADS domain. (CSCsw94409) 2 Release Notes for the NSS2000 Series Firmware Version 1.16