Linksys RT31P2 User Guide - Page 53
Appendix A: Troubleshooting - no dial tone
UPC - 745883559398
View all Linksys RT31P2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Appendix A: Troubleshooting Broadband Router with 2 Phone Ports This appendix provides solutions to problems that may occur during the installation and operation of the Phone Adapter. Read the description below to solve your problems. If you can't find an answer here, check the Vonage website at www.vonage.com or the Linksys website at www.linksys.com. Common Problems and Solutions 1. I don't hear a dial tone, and the PHONE1 (or PHONE2) LED is not lit. Go through this checklist until your problem is solved: • Make sure the telephone is plugged into the appropriate port, Phone 1 or Phone 2. • Disconnect and re-connect the RJ-11 telephone cable between the Router and telephone. • Make sure your telephone is set to its tone setting (not pulse). • Make sure your network has an active Internet connection. Try to access the Internet, and check to see if the Router's Internet LED is lit. If you do not have a connection, power off your network devices, including the Router and cable/DSL modem. Wait 30 seconds, and power on the cable/DSL modem first. Then power on the Router and other network devices. • Verify your account information and confirm that the phone line is registered with Vonage. 2. I'm trying to access the Router's Web-based Utility, but I do not see the login screen. Instead, I see a screen saying, "404 Forbidden." If you are using Windows Explorer, perform the following steps until you see the Web-based Utility's login screen (Netscape Navigator will require similar steps): A. Click File. Make sure Work Offline is NOT checked. B. Press CTRL + F5. This is a hard refresh, which will force Windows Explorer to load new webpages, not cached ones. Appendix A: Troubleshooting 45 Common Problems and Solutions