Linksys SPA-841 Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 19
Choose a Wireless Network, Disconnect the Network Cable from the Router - review
View all Linksys SPA-841 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Wireless-G Bridge for Phone Adapters 10. The new settings will be displayed. Review them before you proceed. Click Next to save your new settings, or click Back to return to the previous screen. 11. The Bridge will attempt to connect to the wireless network using the new settings. Make sure the Bridge's Wireless LED is solidly lit or flashing. This indicates that the Bridge has connected to the wireless network. If the attempt succeeds, proceed to step 12. If the attempt fails, you have two options offered by a pop-up screen. Click the Yes button to save the new settings and proceed, or click the No button to return to the Choose a Wireless Network screen and reconfigure the settings. 12. Disconnect the Ethernet network cable of the Bridge from the router or PC. Click Next to proceed, or click Back to return to the previous screen. Figure 4-13: Confirmation Screen Figure 4-14: If the Bridge Does Not Connect... Screen Chapter 4: Setting Up and Connecting the Wireless-G Bridge for Phone Adapters Running the Setup Wizard Figure 4-15: Disconnect the Network Cable from the Router Screen 13