Linksys SPA2102-NA Quick Start Guide - Page 2

3 In the Optional Settings section, enter the DNS server address(es) in the Primary DNS and optional Secondary DNS fields. 4 Click Submit All Changes. PPPoE (most DSL users) 1 Select PPPoE for the Connection Type. 2 Enter the user name in the PPPoE Login Name field, and enter the password in the PPPoE Login Password field. 3 Click Submit All Changes. If the Phone Adapter is preconfigured by your ITSP, then you do not need to change any of the default voice settings. Refer to the documentation supplied by your service provider for more information. If you want to change the settings for your Internet phone service, refer to the User Guide, which is available on the Linksys website at www.linksys.com. If you want to configure network settings using the Interactive Voice Response Menu, refer to the next section. PPPoE Using the Interactive Voice Response Menu This section explains how to use the Interactive Voice Response Menu to configure the Phone Adapter's network settings. You will use the telephone's keypad to enter your commands and select choices, and the Phone Adapter will use voice responses. To access the Interactive Voice Response Menu: A Use a telephone connected to the PHONE port of the Phone Adapter. (You can only access the Interactive Voice Response Menu through an analog telephone, not any of the Internet phones.) B Press **** (in other words, press the star key four times). C Wait until you hear the "Linksys configuration menu-please enter the option followed by the # (pound) key or hang up to exit" response. D Refer to the following table that lists actions, commands, menu choices, and descriptions. After you select an option, press the # (pound) key. To exit the menu, hang up the telephone. Using the Interactive Voice Response Menu While entering a value, such as an IP address, you may exit without entering any changes. Press the * (star) key twice within half a second. Otherwise, the * will be treated as a decimal point or dot. After entering a value, such as an IP address, press the # (pound) key to indicate you have finished your selection. To save the new setting, press 1. To review the new setting, press 2. To re-enter the new setting, press 3. To cancel your entry and return to the main menu, press * (star). For example, to enter the IP address 191.168.1.105 by keypad, press these keys: 191*168*1*105. Press the # (pound) key to indicate that you have finished entering the IP address. Then press 1 to save the IP address or press the * (star) key to cancel your entry and return to the main menu. If the menu is inactive for more than one minute, the Phone Adapter will time out. You will need to re-enter the menu by pressing ****. The settings you have saved will take effect after you hang up the telephone. The Phone Adapter may reboot at this time. Interactive Voice Response Menu Action Enter Interactive Voice Response Menu Check Internet Connection Type Check Internet IP Address Check Network Mask (or Subnet Mask) Check Gateway IP Address Check MAC Address Check Firmware Version Check Primary DNS Server IP Address Check Internet Web Server Port Check Local IP Address Set Internet Connection Type Command **** 100 110 120 130 140 150 160 170 210 101 Choices Description Use this command to enter the Interactive Voice Response Menu. Do not press any other keys until you hear, "Linksys configuration menu. Please enter the option followed by the # (pound) key or hang up to exit." Hear the Internet connection type of the Phone Adapter. Hear the IP address assigned to the Phone Adapter's Internet (external) interface. Hear the network or subnet mask assigned to the Phone Adapter. Hear the IP address of the Phone Adapter (usually the network router). Hear the MAC address of the Phone Adapter in hexadecimal string format. Hear the version number of the firmware running on the Phone Adapter. Hear the IP address of the primary DNS (Domain Name Service) server. Hear the port number of the Internet Web server used for the Web-based Utility. Hear the local IP address of the Phone Adapter. DHCP - Press 0. Static IP Press 1. PPPoE - Press 2. Select the type of Internet connection you are using. Refer to the documentation supplied by your Internet Service Provider (ISP). Action Set Static IP Address Set Network (or Subnet) Mask Set Gateway IP Address Set Primary DNS Server IP Address Set the Mode Enable/Disable WAN Access to the Web-based Utility Manual Reboot Interactive Voice Response Menu Command Choices Description 111 First, set the Internet Connection Type to static IP address; otherwise, you will hear, "Invalid Option," if you try to set the static IP address. Use the * (star) key when entering a decimal point. 121 First, set the Internet Connection Type to static IP address; otherwise, you will hear, "Invalid Option," if you try to set the network or subnet mask. Use the * (star) key when entering a decimal point. 131 First, set the Internet Connection Type to static IP address; otherwise, you will hear, "Invalid Option," if you try to set the gateway IP address. Use the * (star) key when entering a decimal point. 161 First, set the Internet Connection Type to static IP address; otherwise, you will hear, "Invalid Option," if you try to set the IP address of the primary DNS server. Use the * (star) key when entering a decimal point. 201 Router/NAT If the Phone Adapter acts as the router Mode - Press 0. for your network, use the router/NAT Bridge/Switch mode. Mode - Press 1. If your network already has a router, use the bridge/switch mode. 7932 Enable Press 1. Disable Press 0. Use this setting to enable or disable WAN access to the Web-based Utility. (This Utility lets you configure the Phone Adapter.) 732668 After you hear, "Option successful," hang up the phone. The Phone Adapter will automatically reboot. Action Factory Reset User Factory Reset Interactive Voice Response Menu Command Choices 73738 Confirm Press 1. Cancel - Press * (star). 877778 Confirm Press 1. Cancel - Press * (star). Description This feature may be protected by a password available only from your ITSP. If necessary, enter the password*. The Phone Adapter will request confirmation; enter 1 to confirm. You will hear, "Option successful." Hang up the phone. The Phone Adapter will reboot, and all settings will be reset to their defaults. The Phone Adapter will request confirmation; enter 1 to confirm. You will hear, "Option successful." Hang up the phone. The Phone Adapter will reboot and all user-configurable settings will be reset to their factory default settings. * Follow these instructions to enter the password. • A, B, C, a, b, or c - press 2. • D, E, F, d, e, or f - press 3. • G, H, I, g, h, or i - press 4. • J, K, L, j, k, or l - press 5. • M, N, O, m, n, or o - press 6. • P, Q, R, S, o, q, r, or s - press 7. • T, U, V, t, u, or v - press 8. • W, X, Y, Z, w, x, y, or z - press 9. • All Other Characters - press 0. For example, to enter the password phone@321 by keypad, press these keys: 746630321. Then press the # (pound) key to indicate that you have finished entering the password. To cancel your entry and return to the main menu, press * (star). For additional information or troubleshooting help, refer to the User Guide, which is available on the Linksys website. Contact your Internet Telephony Service Provider for further support. Linksys Website http://www.linksys.com or http://www.linksys.com/support Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2006 Cisco Systems, Inc. All rights reserved. SPA2102-QI-60613A DF