Linksys SPA922 Cisco SPA9000 Voice System Administration Guide - Page 132
Using the IVR with an SAS Line, STEP 1
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Configuring Music on Hold Configuring a Streaming Audio Server g. Close the window for the Telephone Configuration page. h. Repeat this step to configure each phone, as needed. 6 Using the IVR with an SAS Line The IVR can still be used on an SAS line, but the user needs to follow the following steps: STEP 1 Power off the SPA9000. STEP 2 Connect a phone to the port and make sure the phone is on-hook. STEP 3 Power on the SPA9000. STEP 4 Pick up handset and press * * * * to invoke IVR in the usual way. If the SPA9000 boots and finds that the SAS line is on-hook, it does not remove battery from the line so that IVR may be used. But if the SPA9000 boots up and finds that the SAS line is off-hook, it removes battery from the line because no audio session is in progress. SPA9000 Voice System Administration Guide 130