Linksys SPA922 Cisco SPA9000 Voice System Administration Guide - Page 197
MAC Clone Settings Remote Management
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
SPA9000 Field Reference Router Tab B Secondary DNS The DNS server that is used by the SPA9000 NOTE When DHCP is enabled, you can enter the IP address of a DNS server in addition to DHCP-supplied DNS servers. When DHCP is disabled, enter the primary DNS server. Default: 0.0.0.0 DNS Server Order The method for selecting the DNS server: Manual, Manual/ DHCP, and DHCP/Manual DNS Query Mode The mode of DNS query: parallel or sequential NOTE With parallel DNS query mode, the SPA9000 sends the same DNS lookup request to all the DNS servers at the same time, and the first incoming reply is accepted by the SPA9000. Default: parallel Primary NTP Server The IP address or name of the primary NTP server Secondary NTP Server The IP address or name of the secondary NTP server DHCP IP Revalidate Timer: Router tab > Wan Setup page > MAC Clone Settings section Enable MAC Clone Service Cloned MAC Address Enable if you need to assign a different MAC address to the SPA9000 via the Cloned MAC Address field. The MAC address that you need the SPA9000 to assume Router tab > Wan Setup page > Remote Management section Enable WAN Web Server Allows (yes) or prevents (no) access to the administration web server from a computer that is not directly connected to the SPA9000. Default: yes WAN Web Server Port The port that is used for WAN access to the SPA9000 Default: 80 SPA9000 Voice System Administration Guide 195