Linksys SR2016 Cisco SR2016 and SR2024C 16-Port and 24-Port 10/100/1000 Gigabi - Page 2

Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0705R) © 2008 Cisco Systems, Inc. All rights reserved. Printed in the USA on recycled paper containing 10% postconsumer waste. 78-18816-01 3 Installation Perform the steps in this section to install the hardware. STEP 1 Make sure all the devices you will connect to the Switch are powered off. STEP 2 Connect a Category 5 Ethernet network cable to one of the numbered ports on the Switch. Connect the other end to a PC or other network device. STEP 3 Repeat step 2 to connect additional devices. STEP 4 If you are using a mini-GBIC port, connect a mini-GBIC module to the port. For detailed instructions, refer to the module's documentation. NOTE The mini-GBIC ports are shared. Do not use port 12 if you are using themini-GBIC1 port. Do not use port 24 if you are using the mini-GBIC2 port. STEP 5 Connect the supplied power cord to the Switch's power port, and plug the other end into an electrical outlet. When connecting power, always use a surge protector. STEP 6 Power on the devices connected to the Switch. Each active port's corresponding LED will light up on the Switch. Congratulations! The installation of the 10/100/1000 Gigabit Switch is complete! 4 Specifications The following table lists the specifications for the SR2016 10/100/1000 Gigabit Switch. Model Standards Ports Cabling Type LEDs Dimensions Unit Weight Power Certification Operating Temperature Storage Temperature Operating Humidy Storage Humidy SR2016 IEEE 802.3, 802.3u, 802.3x, 802.3ab 16 10/100/1000 Mbps RJ-45 ports Cat5 Ethernet System, 1 through 16 WxHxD 10.98" x 1.75" x 9.45" 279 mm x 44.5 mm x 240 mm 4.75 lbs (2.155 kg) 110-120VAC, 100W FCC Class A, CE 32 to 104ºF (0 to 40ºC) -40 to 158ºF (-40 to 70ºC) 20% to 95%, noncondensing 5% to 95%, noncondensing The following table lists the specifications for the SR2024C 10/100/1000 Gigabit Switch. Model Standards Ports Cabling Type LEDs Dimensions Unit Weight Power Certification Operating Temperature Storage Temperature Operating Humidity Storage Humidity SR2024C IEEE 802.3, 802.3u, 802.3x, 802.3ab 24 10/100/1000 Mbps RJ-45 ports + 2 mini-GBIC ports Cat5 Ethernet System, 1 through 24 WxHxD 17.00" x 1.75" x 13.74" 432 mm x 44.5 mm x 349 mm 7.98 lbs (3.621 kg) 100-127/200-240V~1.0A/0.5A 50~60HZ FCC Class A, CE 32 to 104ºF (0 to 40ºC) -4 to 158ºF (-20 to 70ºC) 10% to 90%, noncondensing 10% to 95%, noncondensing 5 Where to Go From Here Resource Location Customer Support www.cisco.com/go/smallbiz End User License Agreement www.cisco.com/go/smallbiz Regulatory Compliance and Safety www.cisco.com/go/smallbiz Information Warranty Information www.cisco.com/go/smallbiz Cisco Partner Central site for Small www.cisco.com/web/partners/sell/ Business smb/