Linksys WAP51AB User Guide - Page 11
Dual-Band Wireless Access Point, Instant Wireless™ Series - review
UPC - 745883553044
View all Linksys WAP51AB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Instant Wireless™ Series 11. The following Security screen, shown in Figure 5-7, will allow you to enter your WEP key. Each point in your wireless network must use the same WEP key for the network to function properly. Verify that the appropriate key is entered and click the Next button to continue or Back to return to the previous page. The WEP key can consist of the letters "A" through "F" and the numbers "0" through "9" and should be 10 characters in length for 64-bit encryption or 26 characters in length for 128-bit encryption. All points in your wireless network must use the same WEP key to utilize WEP encryption. Dual-Band Wireless Access Point Figure 5-10 12. You should now review the settings you've chosen, as shown in Figure 511. If these settings are correct, click the Yes button to save these settings. If you wish to change any of the settings, click the No button. You will exit the Setup Wizard and can start it again to revise your settings. Figure 5-11 13. At this point, the configuration performed with the Setup Wizard is complete, as shown in Figure 5-12. To configure any other Access Points in your network, you can run this Setup Wizard again. Click the Exit button to exit the Setup Wizard. Figure 5-12 14 15