Linksys WVC200 Cisco WVC200 2.4 GHz Wireless-G PTZ Internet Camera with Audio - Page 1

1 Set up the Wireless-G PTZ Internet Camera with Audio A Insert the Setup CD-ROM into your CD or DVD drive. You see a screen like this one. If it doesn't appear automatically, click the Start button, choose Run, type D:\wvc200.exe in the Open field (where "D" is the drive letter of your CD or DVD drive), then click OK. B Click the Click here to Start button. C Read and agree to the license B agreement, then click Next. D Connect the included Ethernet network cable to your network router or switch, then click Next. E Connect the other end of the cable to the Camera's ETHERNET port, then click Next. F Connect the included power adapter to the Camera's POWER port, plug the other end into a standard electrical outlet, then click Next. G Make sure that the Camera's LEDs are lit, then click Next. E Package Contents C F • Wireless-G PTZ Internet Camera with Audio • Power Adapter • Ethernet Network Cable • Setup CD-ROM with on-screen User Guide • SoloLink DDNS Free Trial Card • Registration Card Wireless-G D G PTZ Internet Camera with Audio Quick Installation Model WVC200 H In the Selection box, select the Camera you're installing, write down the IP address of the Camera, so you can access the Web-based utility later, then click Next. If the Camera you want is not displayed in the Selection box, click Search Again. I For increased network security, type admin, in lowercase letters, in the Administrator Name and Administrator Password fields, then click OK. (You can change H the administrator name and administrator password using the Camera's Web-based Utility later.) J On the Basic Settings screen, change the following settings: • Camera Name: Enter a unique name, up to 15 characters, for the Camera. Unique names are helpful when you are using multiple Cameras on the same network. • Description: Enter a description, I up to 32 characters, with additional information, such as the location, for the Camera. • Time Zone: Select the time zone that corresponds with the Camera's location. • Date: Enter the current date in the provided fields. • Time: Enter the current time in the provided fields. When you have finished making changes, click Next. J