Linksys WVC200 Cisco WVC200 2.4 GHz Wireless-G PTZ Internet Camera with Audio - Page 2
Install Viewer & - review
UPC - 745883569045
View all Linksys WVC200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
K If your network uses static IP addresses, select Static IP address, click Next, then go to Step L. If your network uses a DHCP server to assign IP addresses to network devices, keep the default setting, Automatic Configuration-DHCP, click Next, then go to step M. L Enter an IP Address, Subnet Mask, Default Gateway, Primary DNS, and Secondary DNS that corresponds K with your network's settings, then click Next. M If you want your camera to communicate using a wireless access point or router, select Infrastructure as the Mode Setting, then click Next. If you want your camera to communicate without using a wireless access point or router, select Ad-Hoc as the Mode Setting, then click Next. L M N On the Wireless Settings screen, change the following settings: • SSID: Enter the SSID name of your wireless network. • Channel: If you selected Ad-Hoc mode in step M, select the channel that matches your Ad-Hoc network. When you have finished making changes, click Next. O Select the wireless security setting N that matches your wireless network, then enter the required information for the type of security you're using, then click Next. If your network doesn't have wireless security enabled, select Disabled, then click Next. P Review the new settings for your Camera, then click the Next button. O P Q Click OK to save the new settings or click Cancel to discard your changes. R You see a Congratulations screen like this one. Click Install Viewer & Recorder Utility to install the software on your PC. Q Setup is complete. You can relocate the Camera after you install the Utility and/or the SoloLink service. R For additional information or troubleshooting help, refer to the User Guide on the Setup Wizard CD-ROM. You can also e-mail for further support. 24 Hour Technical Support 800-326-7114 (toll-free from US or Canada) E-mail Support [email protected] Website http://www.linksys.com or http://support.linksys.com RMA (Return Merchandise Authorization) http://www.linksys.com/support FTP Site ftp://ftp.linksys.com Sales Information 800-546-5797 (800-LINKSYS) Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2006 Cisco Systems, Inc. All rights reserved. WVC200-QI-60330NC BW