Lowrance EP-60R Fuel Flow Sensor Installation Configuration and Calibration In - Page 37

Device Name

Get Lowrance EP-60R Fuel Flow Sensor PDF manuals and user guides View all Lowrance EP-60R Fuel Flow Sensor manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

EP-60R Fuel Flow Configuration When configuring your fuel flow, you will open its Device Configuration menu where you can access the Location and Advanced Options menu. You can also change your fuel flow's device name. Device Name You can change how your fuel flow will be displayed on your unit's NMEA 2000 Devices list by inputting a customized device name in the Device Name dialog box. NOTE: Changing the Device Name only will affect the way the EP-60R is shown on your display unit. The customized device name will not be seen by other devices or display units on the NMEA 2000 network. To change Device Name: 1. Press MENU twice, select NMEA 2000 or NETWORKING and press ENTER. 2. Highlight BUS SETUP and press ENTER. Select the desired fuel flow from the Bus Devices list and press ENTER. 3. Device Name will be highlighted. Press ENTER to access the Device Name dialog box. 4. Use the UP and DOWN keys to change the Device Name. When you have finished inputting the desired Device Name, press ENTER. Press EXIT repeatedly to return to the main display. To reset device name to default setting: 1. Press MENU twice, select NMEA 2000 or NETWORKING and press ENTER. A menu will appear with five options: Bus Setup, Fuel Management, NMEA 2000 Alarms, Waypoint Sharing and Backlight Synchronization. 2. Highlight BUS SETUP and press ENTER, which will open the Bus Configuration menu. A list of network devices will be at the top of the page. 3. Select the fuel flow with the device name you want to reset and press ENTER. The Device Configuration menu will appear with the Device Name dialog box highlighted. 4. Press ENTER. Depress the left arrow key until the device name disappears. Press ENTER, then press EXIT to return to the NMEA 2000 menu. 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
37
EP-60R Fuel Flow Configuration
When configuring your fuel flow, you will open its Device Configuration
menu where you can access the Location and Advanced Options menu.
You can also change your fuel flow's device name.
Device Name
You can change how your fuel flow will be displayed on your unit's
NMEA 2000 Devices list by inputting a customized device name in the
Device Name dialog box.
NOTE:
Changing the Device Name only will affect the way the EP-60R is
shown on your display unit. The customized device name will not
be seen by other devices or display units on the NMEA 2000
network.
To change Device Name:
1. Press
MENU
twice, select
NMEA
2000
or
N
ETWORKING
and press
ENTER
.
2. Highlight
B
US
S
ETUP
and press
ENTER
. Select the desired fuel flow
from the Bus Devices list and press
ENTER
.
3. Device Name will be highlighted. Press
ENTER
to access the Device
Name dialog box.
4. Use the
UP
and
DOWN
keys to change the Device Name. When you
have finished inputting the desired Device Name, press
ENTER
.
Press
EXIT
repeatedly to return to the main display.
To reset device name to default setting:
1. Press
MENU
twice, select
NMEA
2000
or
N
ETWORKING
and press
ENTER
. A
menu will appear with five options: Bus Setup, Fuel Management,
NMEA
2000
Alarms,
Waypoint
Sharing
and
Backlight
Synchronization.
2. Highlight
B
US
S
ETUP
and press
ENTER
, which will open the Bus
Configuration menu. A list of network devices will be at the top of the
page.
3. Select the fuel flow with the device name you want to reset and press
ENTER
. The Device Configuration menu will appear with the Device
Name dialog box highlighted.
4. Press
ENTER
. Depress the left arrow key until the device name
disappears. Press
ENTER
, then press
EXIT
to return to the NMEA 2000
menu.