Lowrance HOOK-7 Operators Manual EN - Page 21

Range, Custom range - Upper and Lower limits, Frequency

Get Lowrance HOOK-7 PDF manuals and user guides View all Lowrance HOOK-7 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

NOTE: You can make minor (+/-40%) changes to sensitivity with Auto Sensitivity turned on. You will have to turn it off to make significant adjustments. Range Selects the deepest range shown on the display. Range settings display the section of the water column from the water surface to the selected depth range. If you select too shallow a depth range, the unit will not be able to lock onto the bottom. Custom range - Upper and Lower limits Used to select the upper limit and lower limit of a section of the water column. That allows you to view a section of the water column that does not include the water surface or the bottom. Upper and lower limits must be at least 6.5 ft (2 m) apart. Custom range menu NOTE: When using a custom range, you may not receive any digital depth readings, or you may receive incorrect depth information. Frequency Controls the transducer frequency used by the unit. This unit supports conventional, CHIRP and DownScan sonar frequencies. Only frequencies supported by your transducer will appear on the Frequency menu. 21 Sonar Operation | HOOK series

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
21
Sonar Operation |
HOOK series
Range
Selects the deepest range shown on
the display. Range settings display
the section of the water column from
the water surface to the selected
depth range.
If you select too shallow a depth range, the unit will
not be able to lock onto the bottom.
Custom range — Upper and Lower limits
Used to select the upper limit and lower limit of
a section of the water column. That allows you to
view a section of the water column that does not
include the water surface or the bottom. Upper
and lower limits must be at least 6.5 ft (2 m) apart.
NOTE:
You can make minor (+/-40%)
changes to sensitivity with Auto Sensitivity
turned on. You will have to turn it off to
make significant adjustments.
Custom range
menu
Frequency
Controls the transducer frequency used by the
unit. This unit supports conventional, CHIRP and
DownScan sonar frequencies.
Only frequencies supported by
your transducer will appear on the
Frequency menu.
NOTE
:
When using a custom range, you
may not receive any digital depth read-
ings, or you may receive incorrect depth
information.