Lowrance HOOK-7 Operators Manual EN - Page 27
Installation, Keel offset, Water speed calibration, Temperature calibration, Reset water distance - gps
View all Lowrance HOOK-7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installation Before setting keel offset, measure the distance from the transducer to the bottom of the motor - see illustration. If, for example, the distance is 1 foot, it will be input as (minus) -1 foot. Installation menu Keel offset All transducers measure water depth from the transducer to the bottom. As a result, water depth readings do not account for the distance from the transducer to the keel/bottom of motor or from the transducer to the water surface. Water speed calibration Calibrates a paddlewheel speed sensor with speed data from a GPS source. Temperature calibration Calibrates data from the transducer temperature sensor with data from a known temperature source to ensure the accuracy of temperature information. Reset water distance Reset Water Distance to zero. A: Keel offset (e.g. -1 foot) Transducer Transducer type Selects the type of transducer model attached to your unit. 27 Sonar Operation | HOOK series