Lowrance LMF-200 Installation and Operation Manual - Page 28

Timeout You will notice there is no exit key in the LMF-200. Its menus time out, meaning they will be automatically cleared from the screen after a preset amount of time. The timeout duration will begin after the last button is pushed. 1. To change the Timeout settings, press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press MENU. 2. Highlight TIMEOUT and press MENU. The Timeout menu will open with four options: 3, 5, 10 and 15 seconds. 3. Choose the desired timeout setting and press MENU. You will be taken back to the main display. Eng (Engine)/Tank The Engine/Tank configuration menu displays the number of engines and fuel tanks on the vessel as well as fuel tank capacity. You selected your engine-tank configuration during Boat Setup. If the selected configuration is incorrect, you can return to Boat Setup by resetting the configuration from the Engine/Tank Configuration menu. To reset Eng/Tank configuration: 1. Press MENU, use the UP an DOWN keys to select SYSTEM SETUP and press MENU. 2. Highlight ENG/TANK and press MENU. The Engine-Tank configuration page will appear. 3. Press MENU and the following message will appear: Press Menu to reset Eng/Tank. Press MENU. You will be taken to the Boat Setup screen. Reset The Reset command allows you to switch the LMF-200 back to factory default settings. To reset values: 1. Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press MENU. 2. Highlight RESET and press MENU. The following message will appear: Hit Menu to Rst All values. Press MENU. You will be taken back to the main display. WARNING: Resetting values is a hard reset. All LMF-200 settings will be set back to factory defaults. Resetting values, however, does not affect engine/tank configuration or the calibration and configuration settings of devices on the bus. 22