MSI E7230 User Guide - Page 28
Connectors
View all MSI E7230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
MS-9618 ATX Server Board Connectors The mainboard provides connectors to connect to FDD, IDE HDD, case, LAN, USB Ports, CPU/system power supply fans, ... and etc. Floppy Disk Drive Connector: FDD1 The mainboard provides a standard floppy disk drive connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. FDD1 Hard Disk Connector: IDE1 The mainboard provides a one-channel Ultra ATA 100 bus Master IDE controller that supports PIO mode 0 ~ 4, Bus Master, and Ultra DMA 33/66/100 function. You can connect up to two hard disk drives, CD-ROM drives, 120MB floppy disk drive (reserved for future BIOS), and other devices. IDE1 IDE1 Definition IDE VDMA 1 66/100 Controller Intel ICH6 RAID N/A ATAPI Yes IDE1 (Primary IDE Connector) IDE1 can connect a Master and a Slave drive. You must configure the second hard drive to Slave mode by setting the jumper accordingly. MSI Reminds You... If you install two hard disks on cable, you must configure the second drive to Slave mode by setting its jumper. Refer to the hard disk documentation supplied by hard disk vendors for jumper setting instructions. 2-14