MSI G965M-FI User Guide - Page 52
USB Device Wakeup From S3/S4
UPC - 816909036923
View all MSI G965M-FI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
BIOS Setup Re-Call VGA BIOS From S3 W hen ACPI Standby State is set to [S3/STR], users can select the options in this field. Selecting [Yes] allows BIOS to call VGABIOS to initialize the VGA card when system wakes up (resumes) from S3 sleep state. The system resume time is shortened when you disable the function, but system will need an VGA driver to initialize the VGA card. Therefore, if the VGA driver of the card does not support the initialization feature, the display may work abnormally or not function after resuming from S3. Suspend Time Out (Minute) If system activity is not detected for the length of time specified in this field, all devices except CPU will be shut off. Power Button Function This feature sets the function of the power button. Settings are: [On/ Off] The power button functions as normal power off button. [Suspend] W hen you press the power button, the computer enters the suspend/sleep mode, but if the button is pressed for more than four seconds, the computer is turned off. Restore On AC Power Loss This item specifies whether your system will reboot after a power failure or interrupt occurs. Settings are: [Power Off] Always leaves the computer in the power off state. [Power On] Always leaves the computer in the power on state. [Last State] Restores the system to the status before power failure or interrupt occurred. Wakeup Event Setup Press and the following sub-menu appears. USB Device Wakeup From S3/S4 The item allows the activity of the USB device to wake up the system from S3/ S4 sleep state. S3 Power on by PS/2 KB This setting determines whether the system will be awakened from S3 when input signal of the PS/2 keyboard is detected. 3-17