MSI K8N NEO4-F User Guide - Page 33
Front Panel Connectors: JFP1 / JFP2, Front USB Connectors: JUSB1 / JUSB2 / JUSB3
UPC - 816909007725
View all MSI K8N NEO4-F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Hardware Setup Front Panel Connectors: JFP1 / JFP2 The mainboard provides two front panel connectors for electrical connection to the front panel switches and LEDs. JFP1 is compliant with Intel® Front Panel I/O Connectivity Design Guide. JFP1 Pin Definition PIN Power Power LED Switch 1 2 JFP1 2 1 10 3 9 4 5 HDD Reset 6 LED Switch 7 8 9 Speaker SIGNAL HD_LED_P FP PW R/SLP HD_LED_N FP PW R/SLP RST_SW_N PWR_SW_P RST_SW_P PWR_SW_N RSVD_DNU DESCRIPTION Hard disk LED pull-up MSG LED pull-up Hard disk active LED MSG LED pull-up Reset Switch low reference pull-down to GND Power Switch high reference pull-up Reset Switch high reference pull-up Power Switch low reference pull-down to GND Reserved. Do not use. JFP2 Pin Definition JFP2 2 1 8 7 Power LED PIN SIGNAL 1 GND 3 SLED 5 PLED 7 NC PIN SIGNAL 2 SPK- 4 BUZ+ 6 BUZ- 8 SPK+ Front USB Connectors: JUSB1 / JUSB2 / JUSB3 The mainboard provides three standard USB 2.0 pin headers JUSB1 & JUSB2 & JUSB3. USB 2.0 technology increases data transfer rate up to a maximum throughput of 480Mbps, which is 40 times faster than USB 1.1, and is ideal for connecting high- speed USB interface peripherals such as USB HDD, digital cameras, MP3 players, printers, modems and the like. JUSB1 & JUSB2 & JUSB3 Pin Definition PIN SIGNAL PIN SIGNAL 2 10 1 VCC 2 VCC 1 9 3 USB0- 4 USB1- JUSB1, JUSB2, JUSB3 (USB 2.0) Connected to JUSB1, JUSB2, or JUSB3 (the USB pinheader in YELLOW color) 5 USB0+ 7 GND 9 Key (no pin) 6 USB1+ 8 GND 10 USBOC USB 2.0 Bracket (Optional) MSI Reminds You... Note that the pins of VCC and GND must be connected correctly, or it may cause some damage. 2-19