MSI K9N4 User Guide - Page 11

Memory - bios

Get MSI K9N4 - Ultra-F Motherboard - ATX PDF manuals and user guides
UPC - 816909036183
View all MSI K9N4 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

1. Position the cooling set onto the retention mechanism. Hook one end of the clip to hook first. 2. Then press down the other end of the clip to fasten the cooling set on the top of the retention mechanism. Locate the Fix Lever and lift up it. 3. Fasten down the lever. 4. Attach the CPU Fan cable to the CPU fan connector on the mainboard. MSI Reminds You... 1. Confirm if your CPU cooler is firmly installed before turning on your system. 2. Check the information in PC Health Status of H/W Monitor in BIOS for the CPU temperature. 3. Please note that the mating/unmating durability of the CPU is 20 cycles. Therefore we suggest you do not plug/unplug the CPU too often. Memory The mainboard provides two 240-pin DIMM slots for unbuffered DDR II 400 / 533 / 667 / 800 SDRAM (DDR II 800 is only for Athlon 64 X2), and supports the memory size up to 4GB. To operate properly, at least one DIMM slot must be installed. Install at least one Memory module on one of the slots. Memory modules can be installed on the slots in any order. You can install either single- or double-sided modules to meet your own needs. Installing DDR II Modules Volt Notch 1. The DDR II DIMM has only one notch on the center of memory module. The memory module will only fit in the right orientation. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
1. Position the cooling set onto the retention mechanism.
Hook one end of the clip to hook first.
2. Then press down the other end of the clip to fasten the
cooling set on the top of the retention mechanism.
Locate the Fix Lever and lift up it.
3. Fasten down the lever.
4. Attach the CPU Fan cable to the CPU fan connector on
the mainboard.
MSI Reminds You...
1. Confirm if your CPU cooler is firmly installed before turning on your system.
2. Check the information in PC Health Status of H/W Monitor in BIOS for the CPU temperature.
3. Please note that the mating/unmating durability of the CPU is 20 cycles. Therefore we suggest
you do not plug/unplug the CPU too often.
Memory
The mainboard provides two 240-pin DIMM slots for unbuffered DDR II 400 / 533 / 667 / 800
SDRAM (DDR II 800 is only for Athlon 64 X2), and supports the memory size up to 4GB. To
operate properly, at least one DIMM slot must be installed.
Install at least one Memory module on one of the slots. Memory modules can be installed on the
slots in any order. You can install either single- or double-sided modules to meet your own needs.
Installing DDR II Modules
Notch
Volt
1. The DDR II DIMM has only one notch on the center of memory module. The memory module
will only fit in the right orientation.
5