MSI MAG Z790 TOMAHAWK MAX WIFI User Manual - Page 23
Parallel LPT Port, Parallel LPT Port Settings, Device Mode, Power Management Setup, Enter, ErP Ready
View all MSI MAG Z790 TOMAHAWK MAX WIFI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
▶ Parallel (LPT) Port Enables or disables parallel(LPT) port. ▶ Parallel (LPT) Port Settings Sets parallel port (LPT). If set to Auto, BIOS will optimize the IRQ automatically or you can set it manually. ▶ Device Mode Selects an operating mode for parallel port. [STD Printer Mode] Printer port mode [SPP] Standard Parallel Port mode [EPP-1.9/ 1.7 + SPP] Enhanced Parallel Port-1.9/ 1.7 mode + Standard Parallel Port mode. [ECP] Extended Capability Port mode [ECP + EPP-1.9/ 1.7] Extended Capability Port mode + Enhanced Parallel Port-1.9/ 1.7 mode. ▶ Power Management Setup Sets system Power Management of ErP and AC Power Loss behaviors. Press Enter to enter the sub-menu. ▶ ErP Ready Enables or disables the system power consumption according to ErP regulation. [Enabled] Optimize the system power consumption according to ErP regulation. It will not support S4 & S5 wake up by USB, PCI and PCIe devices. [Disabled] Disables this function. ▶ Restore after AC Power Loss Sets the system behaviors while encountering the AC power loss. [Power Off] Leaves the system in power off state after restoring AC power. [Power On] Boot up the system after restoring AC power. [Last State] Restores the system to the last state. BIOS Setup 23