MSI MPG X570 GAMING PRO CARBON WIFI User Manual - Page 69
Initializing Disks, To initialize disks - review
View all MSI MPG X570 GAMING PRO CARBON WIFI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Initializing Disks New disks and legacy disks must be initialized before they can be used to create an AMD-RAID array. Initialization writes AMD-RAID configuration information (metadata) to a disk. Important y If a disk is part of an AMD-RAID array, the disk cannot be selected for initialization. To initial the disk anyway, delete the AMD-RAID array. Data on the disk is deleted during initialization so ensure the correct disks are chosen to initialize. y A legacy disk can contain valid data. When a legacy disk is initialized, all data on the disk is lost. To initialize disks 1. As previously mentioned, enable RAIDXpert2 Configuration Utility. 2. Go to BIOS > SETTINGS > Advanced > RAIDXpert2 Configuration Utility > Physical Disk Management > Select Physical Disk Operations > Initialize Disk sub-menu. 3. Select desired disks by changing the Physical Disk setting to Enabled. 4. Select OK, then press Enter. 5. Review the warning message, if you want to proceed, select YES, then press Enter. 6. Initialization takes 10 to 15 seconds per disk. During initialization, a complete rescan of all channels is done automatically. AMD RAID Configuration 69